I-GRAPH XS The Laboratory Instrument

With the I-GRAPH XS you will have a cost-effective gas analysis device for laboratory operation. The compact I-GRAPH XS is a fully functional gas-chromatograph. You will receive a revolutionary analytical device which is suitable for various gas measurements.
The I-GRAPH XS is specifically designed for laboratory applications. With its integrated carrier gas supply it is not bound to a specific location but can be easily transported to various locations. The short measuring periods also allow a quick analysis. Due to the electronic control the operator is always informed about the status of the fundtionality.
An integrated vacuum pump allows for the measurement of non-pressurized samples. The integrated touch-display allows moreover for stand-alone operation without the use of a PC.

Properties

  • Simple and process-suited measurement system
  • High reproducibility of the results
  • Various applications
  • Mobile because of its low size and weight
  • Quick measuring cycles
  • Low gas consumption

Technical Specifications:

  • Dimensions:
    width 305 x height 150 x depth 280mm
  • Weight: ca. 3,5 kg
  • Detector: WLD
    Analysis time: 30s to 180s
  • Operating temperature: +2°C to +55°C
  • Max. analysis temperature: + 300°C
  • Max. temperature ramp: 10K/s
  • Power consumption:
    averaged 15 W
  • Sample gas volume: 0,05 µl bis 6 µl
    Sample gas inlet: over internal pump
    from -60 kPa to +60 kPa (-0,6 bar to +0,6 bar)
  • Carrier gas: helium, argon,(hydrogen)
  • Disposable cartridge of the carrier gas:
    100ml/10 bar sufficient for 1 bis 4 weeks permanent operation dependant to the column type
  • External carrier gas pressure:
    100 kPa to 1000 kPa (1 bar to 10 bar)
  • Consumption of the carrier gas:
    100 µl/min for the thin-film column,
    500 µl/min for the packed column
  • Interface: USB (2.0)
  • Sensitivity:
    10 ppm for the thin-film column,
    50 ppm for the packed column
  • Higher sensitivities available optionally
    Gas connections: stainless steel,
    1/16“ AD, threads UNF 10/32
  • Standard-ferrule 1/16“
  • Supply: through the delivered plug adapter 90 to 240 VAC
  • Setting temperatures whilst the operation: relative air humidity <60%
  • Mechanical rating IP 44