OEA Sample containers
Capsules made from tin, nickel, alumina and silver for Organic Elemental Analysis (OEA)
Sample containers for Thermo Scientific Instruments
“Soft” pressed tin capsules for solids
Refer to | Part No. | Diam. | Height | Paking units | Thermo Part No. |
C | 76.1624.00 | 10 mm | 10 mm | 76 | 252 080 00 |
B | 76.9805.26 | 3.2 mm | 4 mm | 250 | 240 053 00 |
A | 76.9811.26 | 5 mm | 9 mm | 250 | 240 064 00 |
“Soft” containers are obtained by pressing light metal foil.
“Hard” moulded ultrapure tin capsules for liquids
Refer to | Part No. | Diam. | Height | Paking units | Thermo Part No. |
G | 84.9900.26 | 1.06 mm | 5.5 mm | 250 | 240 070 00 |
E | 84.9903.26 | 2 mm | 5 mm | 250 | 240 088 20 |
D | 84.9906.26 | 2.88 mm | 6 mm | 250 | 240 088 10 |
F | 84.9921.26 | 3.5 mm | 9 mm | 250 | 240 072 00 |
“Hard” tin containers are heavier than the “Soft” ones and allow hermetic sealing. For this reason the “Hard” tin containers are obtained by moulding ultrapure tin sheets.
“Soft” pressed silver capsules for solids
Refer to | Part No. | Diam. | Height | Paking units | Thermo Part No. |
L | 76.9807.36 | 4 mm | 6 mm | 250 | 240 054 00 |
M | 76.9811.36 | 5 mm | 9 mm | 250 | 240 054 05 |
“Soft” containers are obtained by pressing light metal foil.
“Hard” moulded silver capsules for liquids
Refer to | Part No. | Diam. | Height | Paking units | Thermo Part No. |
N | 84.9903.36 | 2 mm | 5 mm | 250 | 240 051 00 |
“Hard” silver containers are heavier than the “Soft” ones and allow hermetic sealing. For this reason the “Hard” silver containers are obtained by moulding ultrapure silver sheets.
